The new GG-H-FT taps
We have completely revised its tap range for machining abrasive, short-chipping materials up to 45 HRC. These materials include, for example, cast iron materials such as GJL, GJS or GJV, aluminum-silicon cast alloys with a high Si content and high-strength short-chipping steel materials.
XTOP Forming taps
for a longer tool life and more process reliability with hard-to-machine steels
Come and see the latest Highlights and Innovations in round shank tools on our booth F60 in Hall 4.
HSS-Co deep hole drill
HSS-Co deep hole drill! A special developed coating for a small friction coefficient!
XTOP Twist drills with four coolant holes!
XTOP Milling | End mill with corner radius
The competence for high-alloyed materials!
An optimized geometry which was developed particularly for the machining of corrosion and acid-proof steels, along with a compatible coating, form the basis for WEXO solid carbide end mills of the XTOP series.
INOX | HASTELLOY | TITAN | INCONEL
The new RatioMill-Catalogue 2015A
Solid carbide milling tools | Shank end mills | with corner radius | Ball nose end mills | HPC-End mills | High-Feed end mills
A new geometry, which was developed particularly for the machining of corrosion and acid-proof steels as well as high-alloy steels, along with a compatible coating, form the basis for the new generation of WEXO powder steel taps of the XTOP series!
INOX | HASTELLOY | HEAT-TREATABLE STEEL | TOOL STEEL
WEXO solid carbide thread milling cutters
Wherever production problems occur when using conventional taps or forming taps, thread milling provides a useful alternative. Machining is effected in one revolution with the rotating tool additionally moving in the axial direction by one pitch turn.
Universal, process-sure, fast!
The new SYNCHRO-Program from WEXO!